Oil and gas development is occurring in urban, densely populated neighborhoods; however, the impacts of these operations on neighborhood air quality are not well characterized. In this research, we leveraged ambient air monitoring adjacent to an oil and gas production site in Los Angeles, California during active and idle periods. This study analyzed continuous methane (CH4) and non-methane hydrocarbon (NMHC) measurements, together with triggered grab samples and 24 hour integrated canister samples collected by the South Coast Air Quality Management District. Ambient air pollutant levels and trends were evaluated during active and idle well operations to assess changes in neighborhood air quality after the suspension of oil and gas production. We find that mean concentrations of methane, NMHC, benzene, toluene, ethylbenzene, xylenes, styrene, n-hexane, n-pentane, ethane, and propane decreased following the stop in production activities. Using a source apportionment approach, we observed that the "natural gas" drilling source contributed 23.7% to the total VOCs measured during the active phase, and only 0.6% to the total measured VOCs in the idle phase. Near urban oil and gas production sites, residents may face poorer air quality due to the oil and gas activities which may pose adverse health and environmental risks among proximate communities.