GO-Ti3C2 two-dimensional heterojunction nanomaterial for anticorrosion enhancement of epoxy zinc-rich coatings

Lu Shen; Wenjie Zhao; Kui Wang; Jianguang Xu

doi:10.1016/j.jhazmat.2021.126048

GO-Ti₃C₂ two-dimensional heterojunction nanomaterial for anticorrosion enhancement of epoxy zinc-rich coatings

J Hazard Mater. 2021 Sep 5:417:126048. doi: 10.1016/j.jhazmat.2021.126048. Epub 2021 May 7.

Authors

Lu Shen¹, Wenjie Zhao², Kui Wang¹, Jianguang Xu¹

Affiliations

¹ School of Materials Science and Engineering, Yancheng Institute of Technology, Yancheng 224051, PR China.
² Key Laboratory of Marine Materials and Related Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China. Electronic address: zhaowj@nimte.ac.cn.

PMID: 33992004
DOI: 10.1016/j.jhazmat.2021.126048

Abstract

MXenes are a unique family of two-dimensional (2D) transition metal carbides and/or nitrides, which have been proven useful for energy storage, water purification, and biomedical applications. Herein, a kind of heterojunction structure was designed by grafting highly conductive MXene (Ti₃C₂) on the graphene oxide (GO) nanosheets， which was confirmed by Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectronic spectroscopy (XPS) and Raman results. Open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and salt spray measurements corroborated that inclusion of 0.5 wt% Ti₃C₂ or GO-Ti₃C₂ into epoxy zinc-rich coating (ZRC) effectively enhance the cathodic protection capability. Additionally, superior corrosion resistance was achieved by incorporation of GO-Ti₃C₂ into ZRC since GO-Ti₃C₂ in the coating improved the utilization rate of zinc particles and GO provided barrier protection for inhibiting the diffusion of corrosive agents. At the end of immersion, R_c value of ZRC/GO-Ti₃C₂ coating was 3.047 × 10⁴ Ω·cm², which was one order of magnitude higher than that of ZRC coating. Scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) measurements demonstrated that ZRC/GO-Ti₃C₂ coating exhibited lower speed of zinc particles oxidation and intact steel substrate. Hence, ZRC/GO-Ti₃C₂ coating exhibited the optimal corrosion resistance among the four kinds of coatings.

Keywords: Epoxy zinc-rich coating; GO-Ti(3)C(2); Heterojunction nanomaterial; Synergistic enhancement.