Axial spreading of droplet impact on ridged superhydrophobic surfaces

Abstract

Hypothesis: Due to the complex hydrodynamics of droplet impact on ridged superhydrophobic surfaces, quantitative droplet spreading characteristics are unrevealed, limiting the practical applications of ridged superhydrophobic surfaces. During droplet impacting, the size ratio (the ratio of the ridge diameter to the droplet diameter) is an important factor that affects droplet spreading dynamics.

Experiments: We fabricated ridged superhydrophobic surfaces with size ratios ranging from zero to one, and conduct water droplet impact experiments on these surfaces at varied Weber numbers. Aided by the numerical simulations and theoretical analysis, we illustrate the droplet spreading dynamics and reveal the law on the maximum axial spreading coefficient.

Finds: The results show that the droplet spreading and retraction dynamics on ridged superhydrophobic surfaces are significantly asymmetric in the axial and spanwise directions. Focusing on the maximum axial spreading coefficient, we find it decreases first and then increases with increasing size ratios, indicating the existence of the critical size ratio. The maximum axial spreading coefficient can be reduced by 25-40% at the critical size ratio compared with that on flat surfaces. To predict the maximum axial spreading coefficient, two theoretical models are proposed respectively for size ratios smaller and larger than the critical size ratio.

Keywords: Droplet impact; Maximum axial spreading coefficient; Ridged superhydrophobic surfaces; Size ratio.