Poly(acrylic acid) (PAA) bulk gels and threads, typically derived via free-radical polymerization, are of interest as anionic polyelectrolyte mimics of cellular cytosol and as models for early protocells. The thread dimensions have been limited by the diameters of readily-available glass or plastic capillaries, and threads with diameters of less than 50 µm have been difficult to achieve. Here, we report a useful approach for achieving crosslinked, partially neutralized PAA, namely poly(acrylate), gel threads with diameters of a few microns when dry. This technique utilizes coaxial electrospinning to effectively produce capillaries (shells) of polystyrene loaded with a gel-forming precursor mixture composed of 3 M acrylic acid, methylene-bisacrylamide, potassium persulfate and 2.2 M NaOH in the core, followed by thermally-induced polymerization and then the removal of the polystyrene shell. Relatively long (up to 5 mm), continuous PAA threads with thicknesses of 5-15 µm are readily obtained, along with a multitude of PAA gel particles, which result from the occasional break-up of the fluid core prior to gel formation during the electrospinning process. The threads and beads are of the sizes of interest to model ancient protocells, certain functional aspects of excitable cells, such as myocytes and neurons, and various membraneless organelles.
Keywords: bio-mimicking; electrospinning; polyelectrolyte gels; polyelectrolyte threads.