Development of polypropylene (PP) films incorporating antioxidant-antimicrobial agents can inhibit microbial growth and reduce undesirable deteriorating reactions and can preserve the quality of food. This study was aimed to use a combination of sorbic acid (SA), butylated hydroxyanisole (BHA), and butylated hydroxytoluene (BHT) to provide a synergistic effect at their reduced concentrations. A Combination of the additives was more effective in enhancing mechanical properties compared to their single state in film composition. The PP-2%SA-3%BHA film (T3) had the highest tensile strength (17.9 MPa) and the lowest elongation at break (7.1%) than other films. The fourier-transform infrared (FTIR) proposed physical mixing of active additives within PP-matrix. Scanning electron microscopy showed uniform dispersion of the additives in PP-2%SA-1%BHT-1%BHA film (T4) compared to others. BHT containing films decreased the storage and loss moduli leading to weakening of film viscoelastic behaviour and reducing film melting point. The prepared active films showed higher antioxidant activity than control PP-film following an order of T4 > T2 > T3 corresponding to DPPH radical scavenging values of 89.1, 83.4 and 79.1%, respectively. All active films inhibited gram-negative and gram-positive bacteria growth. The results of this study indicated that the prepared active films possess desirable mechanical, thermal, antioxidant and antimicrobial properties enabling their use in food packaging.
Keywords: BHA; BHT; active packaging; mechanical properties; polypropylene; sorbic acid.