This article presents the results of tests aimed at determining the effect of slide burnishing parameters on the surface roughness of shafts made of 42CrMo4 heat-treatable steel. The burnishing process was carried out using tools with polycrystalline diamond and cemented carbide tips. Before burnishing, the samples were turned on a turning lathe to produce samples with an average surface roughness Ra = 2.6 µm. The investigations were carried out according to three-leveled Hartley's poly selective quasi D (PS/DS-P: Ha3) plan, which enables a regression equation in the form of a second-order polynomial to be defined. Artificial neural network models were also used to predict the roughness of the surface of the shafts after slide burnishing. The input parameters of the process that were taken into account included the values of pressure, burnishing speed and feed rate. Overall, the burnishing process examined leads to a reduction in the value of the surface roughness described by the Ra parameter. The artificial neural networks with the best regression statistics predicted an average surface roughness of the shafts with R2 = 0.987. The lowest root-mean-square error and mean absolute error were obtained with all the network structures analysed that were trained with the quasi Newton algorithm.
Keywords: average surface roughness; plastic working; slide burnishing; steel shaft; surface topography.