Blast furnace slag loaded with sulfide nano zero valent iron (S-nZVI@BFS) was applied to remove oxytetracycline (OTC) from water. S-nZVI@BFS was synthesized via liquid reduction and characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Brunauer, Emmett and Teller (BET) theory. The effect of reaction time, initial concentration of OTC, initial pH, and coexisting hexavalent chromium[Cr(Ⅵ)] were investigated. The results show that Fe and S were successfully immobilized on the surface of S-nZVI@BFS, the specific surface area and pore volume of which increased to 141.986 m2·g-1 and 0.388 cm3·g-1, respectively, following the loading of nZVI and sulfurization. The utilization rate of the surface active sites of S-nZVI@BFS was improved with an increase of the initial concentration of OTC; the removal rate increased from 20.12 mg·g-1 to 202.74 mg·g-1 when the initial concentration of OTC was increased from 10 mg·L-1 to 100 mg·L-1. The removal rate decreased with pH, declining from 99.78 mg·g-1 to 41.12 mg·g-1 when pH was increased from 3 to 11 due to the switch from Fendon oxidation to electrostatic adsorption. There was notable competition between OTC and Cr(Ⅵ) meaning that Cr(Ⅵ) can inhibit the removal of OTC, which is dose dependent.
Keywords: blast furnace slag(BFS); combined pollution; hexavalent chromium［Cr(Ⅵ)］; oxytetracycline(OTC); sulfide nanoscale zero-valent iron(S-nZVI@BFS).