Locating an inspection robot is an essential task for inspection missions and spatial data acquisition. Giving a spatial reference to measurements, especially those concerning environmental parameters, e.g., gas concentrations may make them more valuable by enabling more insightful analyses. Thus, an accurate estimation of sensor position and orientation is a significant topic in mobile measurement systems used in robotics, remote sensing, or autonomous vehicles. Those systems often work in urban or underground conditions, which are lowering or disabling the possibility of using Global Navigation Satellite Systems (GNSS) for this purpose. Alternative solutions vary significantly in sensor configuration requirements, positioning accuracy, and computational complexity. The selection of the optimal solution is difficult. The focus here is put on the assessment, using the criterion of the positioning accuracy of the mobile robot with no use of GNSS signals. Automated geodetic surveying equipment is utilized for acquiring precise ground truth data of the robot's movement. The results obtained, with the use of several methods, compared: Wheel odometry, inertial measurement-based dead-reckoning, visual odometry, and trilateration of ultra-wideband signals. The suitability, pros, and cons of each method are discussed in the context of their application in autonomous robotic systems, operating in an underground mine environment.
Keywords: localization techniques; robotics; ultra wideband; unmanned ground vehicles (UGV); visual odometry.