Four colistin susceptibility testing methods were compared with the standard broth microdilution (BMD) in a collection of 75 colistin-susceptible and 75 mcr-positive E. coli, including ST131 isolates. Taking BMD as reference, all methods showed similar categorical agreement rates (CA) of circa 90%, and a low number of very major errors (VME) (0% for the MicroScan system and Etest®, 0.7% for UMIC®), except for the disc diffusion assay (breakpoint ≤ 11 mm), which yielded false-susceptible results for 8% of isolates. Of note is the number of mcr-positive isolates (17.3%) categorized as susceptible (≤2 mg/L) by the BMD method, but as resistant by the MicroScan system. ST131 mcr-positive E. coli were identified as colistin-resistant by all MIC-based methods. Our results show that applying the current clinical cut-off (>2 mg/L), many mcr-positive E. coli remain undetected, while applying a threshold of >1 mg/L the sensitivity of detection increases significantly without loss of specificity. We propose two possible workflows, both starting with the MicroScan system, since it is automated and, importantly, it categorized all mcr-positive isolates as colistin-resistant. MicroScan should be followed by either BMD or MIC-based commercial methods for colistin resistance detection; or, alternatively, MicroScan, followed by PCR for the mcr screening.
Keywords: AST; BMD; E. coli; MicroScan; ST131; colistin; mcr.