Long-term stability of perovskite solar cells (PSCs) is one of the main issues to be solved for forthcoming commercialization of this technology. In this work, thermosetting polyurethane (PU)-based resins are proposed as effective encapsulants for perovskite solar cells to prevent degradation caused by both moisture and oxygen. Application consists of drop-casting the precursor mixture directly over the devices followed by in situ polymerization, avoiding the use of other adhesives. PUs are cost-effective, lightweight, thermal, and light-stable materials whose mechanical, chemical, and physical properties can be easily tuned by thoughtful choice of their precursor. Encapsulated PSCs show extremely good stability when stored under ambient light (maximum, 1000 lux), controlled humidity (28-65%), and temperature (18-30 °C) by retaining 94% of the initial power conversion efficiency after 2500 h (4 months), whereas control devices lose 90% of their performance after 500 h (T80 = 37 h); once stored according to ISOS-D-1, PU-protected devices showed T80 > 1200 h. Encapsulated devices are stable even when immersed in pure water. The demonstration of PUs as promising solution-processed encapsulant materials for PSCs can pave the way for these to become a cost-effective encapsulation route alternative for future industrialization of this technology.
Keywords: encapsulation; oxygen barrier; perovskite solar cells; polyurethanes; water vapor barrier.