Low-voltage-triggered silicon-controlled rectifier (LVTSCR) is expected to provide an electrostatic discharge (ESD) protection for a low-voltage integrated circuit. However, it is normally vulnerable to the latch-up effect due to its extremely low holding voltage. In this paper, a novel LVTSCR embedded with an extra p-type MOSFET called EP-LVTSCR has been proposed and verified in a 28-nm CMOS technology. The proposed device possesses a lower trigger voltage of ~ 6.2 V and a significantly higher holding voltage of ~ 5.5 V with only 23% degradation of the failure current under the transmission line pulse test. It is also shown that the EP-LVTSCR operates with a lower turn-on resistance of ~ 1.8 Ω as well as a reliable leakage current of ~ 1.8 nA measured at 3.63 V, making it suitable for ESD protections in 2.5 V/3.3 V CMOS processes. Moreover, the triggering mechanism and conduction characteristics of the proposed device were explored and demonstrated with TCAD simulation.
Keywords: ESD protection; Failure current; High holding voltage; Low-voltage-triggered SCR (LVTSCR); Turn-on resistance.