The rapid capacity loss caused by the shuttling effect of polysulfides is one of the great challenges of Li-S batteries. In this work, we adopted a simple solid-phase sintering method to synthesize titanium disulfide (TiS2) and further demonstrated it as a superior modifier of separators for Li-S batteries. Two commonly adopted modification processes of separators, including vacuum filtration (VF) and slurry casting (SC) have been used to prepare TiS2/Celgard separators. TiS2-VF/Celgard can better restrain the polysulfide shuttling effect compared with TiS2-SC/Celgard. A TiS2-VF/Celgard-based Li-S battery has a reversible capacity of 771.6 mA h g-1, with a capacity retention of 645.6 mA h g-1 after 500 cycles at 2.0 C, corresponding to a capacity fading rate of ∼0.033% per cycle. This study has shown the potential of TiS2 as a multifunctional modifier of separators for high performance and long cycle life Li-S batteries.