The work reports a novel strategy for combining polymers and metal-organic frameworks (MOFs) into composites for adsorption applications. Calcium silicate (CaSiO3) was introduced into acrylonitrile butadiene styrene/thermoplastic polyurethane (ABS/TPU) alloy, and the CaSiO3/ABS/TPU skeleton was fabricated by 3D printing technology. The Ca-MOF was directly loaded on the surface of acetone-etched 3D skeleton by in-situ growth method. The obtained 3D skeleton was characterized and the performance of methylene blue (MB) adsorption was determined. It is clear that Ca-MOF is successfully loaded on the surface of 3D skeleton due to the presence of CaSiO3. The MB adsorption ratios of the solutions with initial concentrations of 50, 100 and 200 mg/L at the equilibrium time (5 h) are 88%, 88% and 80%, respectively, revealing good MB adsorption performance of the 3D skeleton. The MB adsorption ratio remains 70% at six runs of adsorption-desorption experiment, indicating the excellent recovering property of the skeleton. The results show that the prepared CaSiO3/ABS/TPU 3D skeleton is a candidate adsorbent for printing and dyeing effluent treatment.
Keywords: 3D printing; adsorption; in-situ growth; metal–organic framework; methylene blue.