This work investigates a new generation structural health monitoring (SHM) system for fibre metal laminates (FML) based on an embedded thermoplastic film with compounded piezoceramics, termed piezo-active fibre metal laminate (PFML). The PFML is manufactured using near-series processes and its potential as a passive SHM system is being investigated. A commercial Polyvinylidene fluoride (PVDF) sensor film is used for comparative evaluation of the sensor signals. Furthermore, thermoset and thermoplastic-based FML are equipped with the sensor films and evaluated. For this purpose, static and dynamic three-point bending tests are carried out and the data are recorded. The data obtained from the sensors and the testing machine are compared with the type and time of damage by means of intelligent signal processing. By using a smart sensor system, further investigations are planned which the differentiation between various failure modes, e.g., delamination or fibre breakage.
Keywords: fatigue; fibre metal laminates; hybrid assembled composite; piezoceramic compound; signal processing.