Achieving room-temperature brittle-to-ductile transition in ultrafine layered Fe-Al alloys

Lu-Lu Li; Yanqing Su; Irene J Beyerlein; Wei-Zhong Han

doi:10.1126/sciadv.abb6658

Achieving room-temperature brittle-to-ductile transition in ultrafine layered Fe-Al alloys

Sci Adv. 2020 Sep 23;6(39):eabb6658. doi: 10.1126/sciadv.abb6658. Print 2020 Sep.

Authors

Lu-Lu Li¹, Yanqing Su², Irene J Beyerlein^{3

4}, Wei-Zhong Han⁵

Affiliations

¹ Center for Advancing Materials Performance from the Nanoscale, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China.
² Department of Mechanical Engineering, University of California, Santa Barbara, CA 93106-5070, USA.
³ Department of Mechanical Engineering, University of California, Santa Barbara, CA 93106-5070, USA. wzhanxjtu@mail.xjtu.edu.cn beyerlein@ucsb.edu.
⁴ Materials Department, University of California, Santa Barbara, CA 93106-5070, USA.
⁵ Center for Advancing Materials Performance from the Nanoscale, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China. wzhanxjtu@mail.xjtu.edu.cn beyerlein@ucsb.edu.

Abstract

Fe-Al compounds are of interest due to their combination of light weight, high strength, and wear and corrosion resistance, but new forms that are also ductile are needed for their widespread use. The challenge in developing Fe-Al compositions that are both lightweight and ductile lies in the intrinsic tradeoff between Al concentration and brittle-to-ductile transition temperature. Here, we show that a room-temperature, ductile-like response can be attained in a FeAl/FeAl₂ layered composite. Transmission electron microscopy, nanomechanical testing, and ab initio calculations find a critical layer thickness on the order of 1 μm, below which the FeAl₂ layer homogeneously codeforms with the FeAl layer. The FeAl₂ layer undergoes a fundamental change from multimodal, contained slip to unimodal slip that is aligned and fully transmitting across the FeAl/FeAl₂ interface. Lightweight Fe-Al alloys with room-temperature, ductile-like responses can inspire new applications in reactor systems and other structural applications for extreme environments.

Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).