The aim of this study was to investigate the effect of essential oil (EO) addition (1, 2, and 3% v/v) obtained from different plants (Santolina chamaecyparissus (SC), Schinus molle (SM), and Eucalyptus globulus (EG) on the antimicrobial, physical, water vapor permeability, mechanical, optical and microstructural properties of the carboxymethyl cellulose (CMC) films. The films containing EO at the concentration of 3% showed the highest antimicrobial activity on tested microorganisms. The EO content increase from 1% to 3% in films decreased the moisture content and water solubility of all films. The water vapor permeability also decreased in films with EGEO but it increased in films with SCEO and SMEO. While the tensile strength (TS) of films containing EO (29.43 ± 3.28-77.05 ± 0.02 MPa) was determined higher than the TS of the control (24.60 ± 0.54 MPa), the elongation at break (E%) of films (14.41 ± 0.02-33.01 ± 0.01%) were lower than E% of the control (37.06 ± 0.85%). The microstructures of films were homogeneous in the films containing 1% and 2% EOs. CMC films gained a significant antimicrobial property and improved its characteristic properties with the incorporation of EOs presenting a good potential for applying to foods.
Keywords: Antimicrobial activity; Carboxymethyl cellulose; Edible film; Essential oil.
Copyright © 2020 Elsevier B.V. All rights reserved.