A typical serial manipulator consists of a servo motor, a serial mechanism and an independent joint placed between the motor and the serial mechanism. Both the time-varying characteristics of the inertia of the serial mechanism and the flexibility characteristics of the independent joint are widely found in serial manipulator servo drive systems. These two characteristics not only increase the resonance magnitude of serial manipulators, but also affect the dynamic characteristics of the system. In order to obtain a stable output speed of serial manipulators, the variable parameters of a PI control strategy is applied to a serial manipulator servo drive system. Firstly, dynamic model of a serial manipulator servo drive system is established based on a two-inertia system. Then the transfer function from motor speed to motor electromagnetic torque is derived by the state-space equation. Furthermore, the parameters of the PI controller are designed and optimized utilizing three different pole assignment strategies with the identical radius, the identical damping coefficients, and the identical real parts. The results indicate that a serial manipulator servo drive system can obtain good dynamic characteristics by selecting parameters of the PI controller appropriately.
Keywords: PI control strategy; Serial manipulator servo drive system; pole assignment strategies; the flexibility characteristics of the independent joint; the time-varying characteristics of the inertia.