Simultaneous screening of the stability and dosimetry of nanoparticles dispersions for in vitro toxicological studies with static multiple light scattering technique

Abstract

To evaluate the nanoparticle (NP) toxicity, much efforts have been devoted for developing methods to accurately disperse NPs into aqueous suspensions prior to in vitro toxicological studies. As NP toxicity is strongly dependent on their physicochemical properties, NP characterization is a key step for any in vitro toxicological study. This study demonstrates that the static multiple light scattering (SMLS) technique allows for the simultaneous screening of the NP size, agglomeration state, stability and dosimetry in biological media. Batch dispersions of TiO₂ P25 NPs in water with various bovine serum albumin (BSA) mass fractions (from 0% to 0.5%) and dilutions of these dispersions into cell culture media were characterized with SMLS. In the batch dispersions, TiO₂ NPs are stable and well dispersed for BSA mass fraction lower than 0.2% while agglomeration and rapid settling is observed for higher BSA mass fractions. Paradoxically, when diluted in cell culture media, TiO₂ NPs are well dispersed and stable for BSA mass fractions higher than 0.2%. The TiO₂ NP dosimetry of these dilutions was evaluated experimentally with SMLS and confronted with numerical approaches. The TiO₂ NP bottom concentration evolves far more slowly in the case of the higher BSA mass fraction. Such measurements give valuable insights on the NP fate and transport in biological media to obtain in fine reliable size and dose-cytotoxicity responses.

Keywords: Dosimetry; Fate and transport; Nanoparticles; Stability; Static multiple light scattering.