Removal mechanisms of Cr(VI) and Cr(III) by biochar supported nanosized zero-valent iron: Synergy of adsorption, reduction and transformation

Abstract

In this study, sludge-derived biochar was prepared and utilized to support nano-zero-valent iron (NZVI-SDBC) for removing Cr(VI) and Cr(III) from aqueous solution with the aim of investigating their removal and transformation. Under the conditions of initial pH of 4, dosage of 1 g/L, temperature of 25 °C, and rotational speed of 160 rpm, 64.13% Cr species could be removed by NZVI-SDBC from Cr(VI) solution and 28.89% from Cr(III) solution. Coexisting ions experiments showed that Cu(II) and humic acids dramatically affected the removal of Cr(VI) and Cr(III), while the effect of Na(I) and Ca(II) was almost negligible. Based on this, through the coexistence and pre-loaded Cr(III) experiments, the conversion from Cr(VI) to Cr(III) was demonstrated to enhance the further attraction on Cr(VI) and promote the subsequent removal of Cr(VI). The SDBC of NZVI-SDBC could serve as electron shuttle mediator to facilitate the electron transfer between adsorbed Cr(VI) and NZVI for ortho-reduction. The transformation and removal mechanisms were further discussed by various characterizations. The kinetics of Cr(VI) removal suggested that the removal process of Cr(VI) could be divided into three phases dominated by different mechanisms (adsorption, direct/ortho reduction, electrostatic attraction), in which Cr(VI) and Cr(III) showed different behaviors of interaction. The removal of Cr(III) mainly depended on sufficient adsorption sites and the direct complexation with Fe(II). Finally, the reusability of NZVI-SDBC was assessed by adsorption/desorption recycling test. These results provided new insights into the removal and transformation mechanisms of Cr(VI) and Cr(III) by biochar-based nanocomposites.

Keywords: Cr(VI)/Cr(III) removal; Mechanisms; Nanosized zero-valent iron; Sludge-derived biochar; Transformation.