The authors report the case of an atraumatic femoral component fracture 10 years after primary total knee arthroplasty (TKA) with a modern cemented fixed bearing system. The patient, a 70-year-old man, had the complication without inciting trauma, and he subsequently had severe pain and disability. This rare mode of TKA failure occurred at the superolateral aspect of the femoral component's anterior flange. At the time of revision, no femoral osteolysis was seen and the backside of the prosthesis fracture fragment was found to be free of cement. To the authors' knowledge, this is the first case of femoral component fracture in a Vanguard TKA (Biomet, Warsaw, Indiana), and the first case of fracture in a modern cobalt-chrome alloy femoral component associated with aseptic cement debonding. Femoral component stress fracture is a rare but serious complication of TKA. Reports of femoral component fracture in early designs were attributed to geometric design flaws, whereas modern TKA designs appear to fail when ingrowth failure, aseptic debonding, or osteolysis result in inadequate bony support of the prosthesis. Careful attention to bone cuts in porous-coated uncemented TKA systems and proper cementing technique in cemented TKA systems may preclude this rare complication. In the case of severe osteolysis, early revision may prevent catastrophic implant failure. [Orthopedics. 2020;43(5):e476-e479.].
Copyright 2020, SLACK Incorporated.