In hostile environments, sensing is critical for many industries such as chemical and oil/gas. Within this industry, the deposition of scales or minerals on various infrastructure components (e.g., pipelines) forms a reliability hazard that needs to be monitored. Therefore, the approach adopted in this study to tackle this issue relies on the use of real-time sensing of specific ions in brine, the natural trigger for ions deposition. In order to do so, electrochemical sensors based on carbon nanotubes (CNTs) are developed, taking advantage of their unique properties facilitated by different synthesis and fabrication methods. One of these promising synthesis methods is inkjet printing of CNT films since in general, it has exceptional benefits over other approaches that are used to print CNTs. Furthermore, it does not need the use templates. In addition, it is a very fast technique with consistent printing results for many applications along with very low cost on various shapes/formfactors. As these sensors are exposed to a hostile environment (chemical, temperature, etc.), the stability of the CNT films is of great importance. In this study, a comprehensive investigation of the stability of CNT surfaces upon exposure to elements is presented. Accordingly, the several impacts of this interaction on physical properties of the surfaces as a function of interaction time and brine chemical composition are assessed. Moreover, the approach used for investigating the impact of this exposure involves the following: surface electrical resistance change using four probe measurements; surface roughness/topography using Atomic Force Microscopy (AFM) along Scanning Electron Microscopy (SEM); quality of CNT through Raman spectroscopy and wettability using the sessile drop method. The sensing capabilities of the devices are investigated by looking at the sensing selectivity of target ions, resetting capabilities, and sensing sensitivity manifested in the electrical resistance change. Consequently, our results indicate that while inkjet films are very promising sensor material, the fabrication and long term stability require further optimization of the films along with the process to make them meet reliability and lifetime requirements in the oil/gas hostile operational environments.