Natural groundwater from the towns of Wabana and Freshwater and treated well water from the town of Wabana in Newfoundland and Labrador, Canada were tested separately and together in sand columns to study the removal of arsenic. The most ideal conditions for arsenic removal appeared to include an arsenic concentration of approximately 35 µg/L and lower, an Fe:As mass ratio in the order of 65 and lower, and aeration of the sand media. Active aeration by pumping air though the filter, passive aeration by scraping off top layers of sand and virtual aeration by diluting the strength of the water being treated, were employed and compared. For tests where groundwater from the towns of Wabana and Freshwater was combined, arsenic removal was optimized and other elements, in addition to iron, were also correlated with effluent arsenic. Further, for these same tests there was a gradual increase in effluent pH that could have been due to oxygen depletion or gradually more reducing conditions in the sand column. Where Ni, Mn and Zn were correlated with effluent arsenic it was concluded that the increase in pH increased heavy metal removal and arsenic release. In the test where the treated Wabana water made up a greater proportion of the mix than the Wabana groundwater, lithium was also correlated with arsenic.
Keywords: Arsenic removal; Groundwater matrix; Iron–arsenic ratio; Metals; Sand filtration.