Background: Cyclophosphamide (CP) and ifosfamide (IP) contaminations have been detected in hospital environments. This study was conducted to determine if there was any contamination in the spaces (floors and door handles) between the hospital exit and the antineoplastic drugs (ADs) preparation and administration units. At the same time, the authors proposed a new automation of the analytical procedure to considerably decrease the time needed for sample preparation and analysis.
Material and methods: To evaluate the ADs contamination of surfaces, 829 wipe tests were performed in a campaign involving 3 hospitals located in Italy. Sampling was performed using an innovative kit. The levels of ADs were measured in each wipe sample using liquid chromatography/triple quadrupole.
Results: On-line solid-phase extraction guarantees the construction of a robust and reproducible analytical method. The CP and IP recoveries from stainless steel, polycarbonate and polyvinyl chloride ranged >80%, and the wipe holders and the automation tested ensured desorption efficiencies close to 100% for both the ADs. Of the 552 wipes taken on the spaces between the hospital exit and the preparation, administration and pharmacy warehouse units, 22 were greater than or equal to the limit of quantification, all adjacent to the administration units.
Conclusions: This study provides an insight into the exposure situation against ADs residues. In order to improve environmental monitoring programs, the authors propose to evaluate the ADs contamination also outside the preparation, administration and pharmacy warehouse units. Med Pr. 2020;71(5):519-29.
Keywords: antineoplastic drugs; cyclophosphamide; ifosfamide; occupational exposure; surface contamination; wipe test.
This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.