Hierarchical Composites with Electrophoretically Deposited Carbon Nanotubes for In Situ Sensing of Deformation and Damage

Colleen M Murray; Sagar M Doshi; Dae Han Sung; Erik T Thostenson

doi:10.3390/nano10071262

Hierarchical Composites with Electrophoretically Deposited Carbon Nanotubes for In Situ Sensing of Deformation and Damage

Nanomaterials (Basel). 2020 Jun 28;10(7):1262. doi: 10.3390/nano10071262.

Authors

Colleen M Murray^{1

2}, Sagar M Doshi^{1

3}, Dae Han Sung^{1

3}, Erik T Thostenson^{1

2

3}

Affiliations

¹ Center for Composite Materials, University of Delaware, 101 Academy Street, Newark, DE 19716, USA.
² Department of Materials Science and Engineering, University of Delaware, 101 Academy Street, Newark, DE 19716, USA.
³ Department of Mechanical Engineering, University of Delaware, 101 Academy Street, Newark, DE 19716, USA.

Abstract

As composites are used increasingly in structural components, novel techniques for detecting micro-scale damage are required. Their nanoscale size and high aspect ratio allow carbon nanotubes to create electrically conductive pathways that enable sensing. In this work, carbon nanotubes are deposited onto glass fabric using electrophoretic deposition to create hierarchical composites. Polyethylenimine functionalized carbon nanotubes are deposited from an aqueous dispersion using an electric field. Symmetric cross-ply composites are investigated as a model system to demonstrate the ability to detect incipient damage and transverse microcracks. The specimens are subjected to tensile loading, and a resistance increase is observed because of two key mechanisms-a reversible change in nanotube-nanotube tunneling gaps due to elastic straining of the network and a permanent severing of paths in the conducting network due to formation of transverse cracks in the 90° plies. By analyzing the electrical response, the damage state can be identified. Acoustic emission sensors are used to validate the results. The strength and Young's modulus of the composites with integrated carbon nanotubes are similar to the control specimens. Crack density measurements using edge replication reveal that transverse cracking can be suppressed, demonstrating multi-functionality with improved damage tolerance and integrated sensing.

Keywords: crack density; cross-ply laminates; glass-fiber composites; piezoresistive sensors; structural health monitoring.

Abstract

Grants and funding