High temperature melting treatment and cement solidification are technologies currently used to reduce the leaching of heavy metals in municipal solid waste incinerator (MSWI) fly ash. In this paper, to ascertain the feasibility of melting MSWI fly ash with blast furnace (BF) slag, ultra-risk MSWI(U-MSWI) fly ash having high heavy metal (Zn, Pb, Cu, and Cr) contents were blended with BF slag, then melted and quenched into water to prepare reconstructed slag. The melting and solidification behaviors, phase composition and microstructure, and heavy metal leachability of reconstructed slag were studied. In addition, to study the further solidification and utilization of reconstructed slag in cement, the compressive strength and leaching concentration of cement composites with reconstructed slag were also investigated. The results indicate that the presence of heavy metals in the U-MSWI fly ash had a little influence on the microstructure and phase composition of reconstructed slag. The leaching concentration of heavy metals in the reconstructed slag increased with the increasing of U-MSWI fly ash content, and when the content of U-MSWI fly ash was less than 50 wt%, the reconstructed slag could meet the environmental requirements. The reconstructed slag further solidified by cement could be applied to landfill and construction materials. The technology of melting reconstruction treatment with cement solidification was a technical-economical choice for the industrial treatment of U-MSWI fly ash.
Keywords: Heavy metals; Industrial treatment; Landfill and construction materials; Leaching concentration; Reconstructed slag; Utilization.