In this work, magnesium silicate-based sulfonated polystyrene sphere composites (SPS/MgSi) were synthesized by one-step (SMD1) and two-step (SMD2) methods. For SMD1, MgSi particles were densely assembled on the surface of SPS, assisted by complexation between Fe3+ and hydroxyl phenol. For SMD2, SPS/SiO2 was firstly obtained by the same method as SMD1, and then SPS/SiO2 was transformed directly to SPS/MgSi under hydrothermal conditions. Therefore, MgSi obtained by the two-step method had an interwoven structure. Compared to SPS, MgSi and SMD1, SMD2 presented a larger specific surface area and more negative surface charges. Therefore, SMD2 showed superior adsorption performance toward CIP with concentrations of 5, 10 and 50 mg/L, and for 50 mg/L, the equilibrium adsorption capacity could reach 329.7 mg/g. The adsorption process is fast and can be described by the pseudo-second-order kinetic model. The relationship between pH value and Zeta potential demonstrated that electrostatic interaction dominated the adsorption process. In addition, competitive adsorption showed that the effect of Na+ was negligible but the effect of Ca2+ was dependent on its concentration. Humid acid (HA) could slightly promote the absorption of CIP by SMD2. After five rounds of adsorption-desorption, the equilibrium adsorption capacity of SMD2 still remained at 288.6 mg/L for 50 mg/L CIP. Notably, SMD2 presented likewise superior adsorption capacity for CIP with concentrations of 10 and 50 mg/L in Minjiang source water. All the results indicated that this synthesis method is universal and that SMD2 has potential as an adsorbent for CIP removal from aquatic environments.
Keywords: Antibiotic; Competitive adsorption; Complexation; Regenerable; Sulfonated polystyrene sphere/Magnesium silicate.
Copyright © 2020. Published by Elsevier B.V.