Commercial- and laboratory modified- cationic cassava starches and their composites with magnetic particles were examined for characteristics and separation efficiency. Scanning electron micrographs showed that cationic starch with an increasing degree of substitution (DS) value (0.0180 to 0.91) showed greater clumped polyhedral granules and became markedly enlarged with disintegrated boundaries. Zeta potential analysis revealed that the increase in the DS value in cationic starches resulted in an increase in positive charge. The maximum harvesting efficiency of 92.86 ± 0.46% was achieved when commercial cationic starch with DS 0.040 at 1.0 g L-1 was added to the Chlorella sp. solution. The maximum recovery capacity (10.20 ± 0.16 g DCW g starch-1) was recorded by using commercial cationic starch with DS 0.040 at a lower dosage of 0.1 g L-1. Their composites showed lower separation efficiency than the commercial cationic starches. The results suggest that the commercial cationic cassava starch with 0.040 DS shows great potential as a flocculant for algal separation. This first report of using commercial cationic cassava starch as a flocculant provides a low cost and convenient process to separate algal cells from the culture medium. Moreover, uncontaminated magnetic particle biomass allows for wide range of algal utilization in food and pharmaceutical biotechnologies.
Keywords: Biomass; Cassava starch; Magnetic particle; Microalgae; Separation.
Copyright © 2018 Elsevier B.V. All rights reserved.