The influences of aging treatments on microstructures and the corrosion properties of an Al-Cu-Li alloy were investigated through an immersion test in intergranular corrosion (IGC) solutions, a potentiodynamic polarization test, and electrochemical impedance spectra (EIS), combined with scanning and transmission electron microscopy. The results demonstrated that the Al-Cu-Li alloy displayed outstanding comprehensive mechanical properties and IGC resistance after treating with pre-strain deformation and a double aging process (PDA). Both the PDA and pre-strain followed by creep aging (PCA) treatments significantly increased the number densities of T1 and θ' precipitates in the grain interior. The increase in precipitates in the grain interior greatly reduced the Cu-rich precipitates on the grain boundaries and inhibited the formation of a precipitate-free zone (PFZ). The electrochemical characteristics of the Al-Cu-Li alloy were influenced by the precipitates in the grain interior and grain boundaries. The studied alloy gained high IGC resistance due to the refinement of its microstructure, and the main corrosion mode was intra-granular pitting corrosion; thus, the corrosion diffusion rate was slowed down.
Keywords: Al–Cu–Li; aging treatments; corrosion properties; microstructure; pre-strain.