Poly(l-lactide) (PLLA) as one of the most well-known biodegradable polyesters has been studied extensively for bone tissue engineering. If being properly programmed, scaffolds from PLLA can also be endowed with the capability of shape memory. However, several noted issues, for example, mechanical brittleness, high glass transition temperature Tg, and relatively poor shape retention and recovery properties, necessitate modification of the PLLA to improve its application efficacy in physiological conditions. This study is proposed to modify PLLA by having the biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) incorporated to form ultrafine composite fibers (i.e., PLLA-PHBV) through electrospinning. Different pairs of PLLA-PHBV at the varying mass ratios of 10:0, 9:1, 8:2, 7:3, 6:4, and 0:10 can be successfully electrospun into fibrous form with the fineness of 2-3 μm. Incorporation of PHBV enables to give rise to desired Tg decreases and also, interestingly, increases in the Young's modulus of the PLLA-PHBV blends, while gradually increasing the PHBV mass ratios up to 30%. The PLLA-PHBV (7:3) formulation is identified to present excellent shape memory properties with high shape fixing ratio (>98%) and shape recovery ratio (>96%) compared to the unmodified PLLA fiber counterpart. Moreover, the PLLA-PHBV (7:3) fibers also show enhanced osteogenesis-inducing ability in the mouse bone mesenchymal stem cells, even under nonosteoinductive conditions. Collectively, for the first time this study demonstrates the enhanced shape memory and osteogenesis capabilities of the electrospun PLLA-PHBV composite fibers, and the researched PLLA-PHBV (7:3) fiber system could be potentially applied as a multifunctional scaffolding material for applications in bone tissue repair and regeneration. Impact statement By first converting the poly(l-lactide) (PLLA)-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) hybrids into fibrous form at varied mass ratios followed by a thorough characterization, we reasonably demonstrated that incorporation of an appropriate amount of PHBV (i.e., 30%) into the PLLA fibers could give rise to significant improvement on the shape memory capability of the PLLA, along with the desired decreases in the transition temperature (Tg). Moreover, the fibrous PLLA-PHBV (7:3) scaffold was also found to significantly promote the osteogenic commitment in bone mesenchymal stem cells with osteoinductive factors in a synergistic manner. Our biomimicking and shape memory enabled fibrous scaffold of PLLA-PHBV could be used to construct multifunctional three-dimensional scaffold with shape memory effect for bone regeneration.
Keywords: PHBV; PLLA; bone tissue engineering; electrospinning; shape memory polymer.