Investigation of acoustic and geometric effects on the sonoreactor performance

Sherif S Rashwan; Ibrahim Dincer; Atef Mohany

doi:10.1016/j.ultsonch.2020.105174

Investigation of acoustic and geometric effects on the sonoreactor performance

Ultrason Sonochem. 2020 Nov:68:105174. doi: 10.1016/j.ultsonch.2020.105174. Epub 2020 May 16.

Authors

Sherif S Rashwan¹, Ibrahim Dincer², Atef Mohany²

Affiliations

¹ Faculty of Engineering and Applied Science, University of Ontario Institute of Technology 2000 Simcoe St. North, Oshawa, Ontario L1G 0C5, Canada. Electronic address: Sherif.Seifeldin@uoit.ca.
² Faculty of Engineering and Applied Science, University of Ontario Institute of Technology 2000 Simcoe St. North, Oshawa, Ontario L1G 0C5, Canada.

PMID: 32505100
DOI: 10.1016/j.ultsonch.2020.105174

Abstract

In this work, three design configurations of a sonoreactor are considered under various operating conditions, and the acoustic characteristics during water sonication are investigated while using an immersed-type ultrasonic flat transducer probe in a sonoreactor model. Numerical models are also developed to simulate the sonication process, and they are successfully validated and compared with available data in the literature. Several sets of numerical investigations are conducted using the finite-element method and solved by the computational acoustics module in the COMSOL Multiphysics. The effects of the acoustical and geometrical parameters are investigated, analyzed, and reported, including the ultrasonic frequency, acoustic intensity, and scaling-up the reactor. The present study includes a parametric investigation examining the change of the ultrasonic frequency, intensity, and probe immersion depth on the performance. The results of the parametric study show that the highest cavitation energy corresponds to the maximum magnitude of negative pressure that takes place in the range of 60-80 kHz. The cavitation energy analyses are conducted under the conditions of 20 kHz of frequency and at 36 W input power. It is found that the cavitation energy of 15.87 W could produce 2.98 × 10^-10 mol/J of sonochemical efficiency. In addition, the effect of altering the transducer probe depth changes the acoustic pressure field insignificantly. Furthermore, a recommendation is made to improve the sonochemical efficiency by introducing more considerable ultrasound input power while operating the sonoreactor at an ultrasonic frequency lower than 60 kHz. The results presented in this paper provide a comprehensive assessment of different sonoreactors and the feasibility of scaling-up their production rate.

Keywords: Efficiency; Energy; Scalability; Sonoreactor; Ultrasound.