Nowadays, the interest on nanofibrillated cellulose (CNF) has increased owing to its sustainability and its capacity to improve mechanical and barrier properties of polymeric films. Moreover, this filler shows some drawbacks related with its high capacity to form aggregates, hindering its dispersion in the matrix. In this work, an improved procedure to optimize the dispersability of CNF in a thermoplastic starch was put forward. On the one hand, CNF needs a hydrophilic dispersant to be included in the matrix, and on the other, starch needs a hydrophilic plasticizer to obtain a thermoformable material. Glycerol was used to fulfil both targets at once. CNF was predispersed in the plasticizer before nanofibrillation and later on was included into starch, obtaining thin films. The tensile strength of these CNF-starch composite films was 60% higher than the plain thermoplastic starch at a very low 0.36% w/w percentage of CNF. The films showed a noticeable correlation between water uptake, and temperature and humidity. Regarding permeability, a ca. 55% oxygen and water vapor permeability drop was found by nanofiller loading. The hydrolytic susceptibility of the composite was confirmed, being similar to that of the thermoplastic starch.
Keywords: barrier properties; biodegradable nanocomposites; nanofibrillated cellulose; starch.