In this work, we study the preparation of new sulfonated polyether ether ketone (sPEEK) nanocomposite membranes, containing highly ionic silica layered nanoadditives, as a low cost and efficient proton exchange membranes for fuel cell applications. To achieve the best compromise among mechanical strength, dimensional stability and proton conductivity, sPEEK polymers with different sulfonation degree (DS) were examined. Silica nanoplatelets, decorated with a plethora of sulfonic acid groups, were synthesized through the one-step process, and composite membranes at 1, 3 and 5 wt% of filler loadings were prepared by a simple casting procedure. The presence of ionic layered additives improves the mechanical strength, the water retention capacity and the transport properties remarkably. The nanocomposite membrane with 5% wt of nanoadditive exhibited an improvement of tensile strength almost 160% (68.32 MPa,) with respect to pristine sPEEK and a ten-times higher rate of proton conductivity (12.8 mS cm-1) under very harsh operative conditions (i.e., 90 °C and 30% RH), compared to a filler-free membrane. These findings represent a significant advance as a polymer electrolyte or a fuel cell application.
Keywords: dynamic mechanical analysis (DMA); nanocomposite membranes; organosilica layered materials; proton conductivity; proton exchange membrane fuel cells (PEM-FCs); pulsed field gradient nuclear magnetic resonance (PFG-NMR); sulfonated polyether ether ketone.