Herein, a nanowelding technique is adopted to fabricate three-dimensional layer-by-layer Pd-containing nanocomposite structures with special properties. Nanowires fabricated from noble metals (Pd, Pt, Au, and Ag) were used to prepare Pd-Pd nanostructures and Pd-Au, Pd-Pt, Pd-Ag, and Pd-Pt-Au nanocomposite structures by controlling the welding temperature. The recrystallization behavior of the welded composite materials was observed and analyzed. In addition, their excellent mechanical and electrical properties were confirmed by performing 10,000 bending test cycles and measuring the resistances. Finally, flexible and wearable nanoheaters and gas sensors were fabricated using our proposed method. In comparison with conventional techniques, our proposed method can not only easily achieve sensors with a large surface area and flexibility but also improve their performance through the addition of catalyst metals. A gas sensor fabricated using the Pd-Au nanocomposites demonstrated 3.9-fold and 1.1-fold faster H2 recovery and response, respectively, than a pure Pd-Pd gas sensor device. Moreover, the Pd-Ag nanocomposite exhibited a high sensitivity of 5.5% (better than that of other fabricated gas sensors) for 1.6% H2 concentration. Therefore, we believe that the fabricated nanocomposites appear promising for wide applications in wearable gas sensors, flexible optical devices, and flexible catalytic devices.
Keywords: 3D layer-by-layer nanostructures; Pd-containing nanocomposites; flexible and wearable device; hydrogen sensing; nanoheater.