Wind erosion could be regarded as one of the most important phenomena especially in arid lands in the globe, which destroys vast areas with its rapid growth. Due to global droughts and climate change, vegetation is weakened and soil particles are more easily exposed to wind erosion. Today, various methods have been developed to control wind erosion. One of the most commonly used methods is the use of mulch. Mulch has several types (physical-chemical). The purpose of this research is to make organic mulch with inexpensive and available compounds to prevent environmental pollution as well as preventing wind erosion. For this purpose, Chaff, Manure, Biosolids and Black Strap mixture were used. The surface response method (RSM) was utilized to perform the relevant tests and create optimal situation. In this study, the central composite design (CCD) in RSM modeling was applied to make the optimal experimental conditions of erosion and penetration resistance. The effect of concentration of Chaff, Manure, Biosolids and Black Strap, was evaluated in erosion and penetration resistance and each variable was coded at five levels. The optimum values for penetration resistance of 1.8 (kg/cm2) for Chaff, Manure, Biosolids, and Black Strap, were 11.32, 15.72, 19.23 and 4.37 g, respectively. Also, the optimum values of mulch combination for wind erosion of 1.8 kg/cm2 for Chaff, Manure, Biosolids, and Black Strap, were 12.49, 19.95, 16.71 and 7.15 g, respectively. By increasing the use of these compounds, adhesion and erosion resistance increased and more consumption of Black Strap had a reverse effect. This was due to the loosing of soil particles and creating exponential mode in graphs. According to the results, no particular distinction was found between predicted data by Design-Expert software and experimental data and simulation results can be expressed reliably.