Tire/road noise in most driving conditions dominates other sources of traffic noise. One of the most efficient ways of reducing tire/road noise is to use the so-called "low noise pavement". According to numerous studies, at present, poroelastic road pavement that is composed of rubber and mineral aggregate and polyurethane or bituminous binder gives the best noise reduction up to 12 dB. Unfortunately, there are many problems with making durable poroelastic pavements. This article presents the first results of a project that is executed in Poland and aims at the development of a durable, low noise poroelastic pavement based on polymer-modified asphalt binder called Safe, Eco-friendly POroelastic Road Surface (SEPOR). Two test sections were built in 2019 to test the production technology and performance of the SEPOR pavement. It is observed that some of the problems with previous poroelastic materials were mainly eliminated (especially delamination from the base layer and raveling) but noise reduction is a little less than expected (up to 9 dB). Rolling resistance for car tires is acceptable and fire properties (damping of spill fuel fires, toxic gas emission) are very good.
Keywords: fire; highly modified bitumen; poroelastic pavement; road; rolling resistance; rubber; tire; tire/road noise.