Gravity-driven membrane (GDM) filtration system is a promising process for decentralized drinking water treatment. During the operation, membrane relaxation and shear stress could be simply achieved by intermittent filtration and water disturbance (created by occasionally shaking membrane model or stirring water in membrane tank), respectively. To better understand the impact of membrane relaxation and shear stress on the biofouling layer and stable flux in GDM system, action of daily 60-min intermission, daily flushing (cross-flow velocity = 10 cm s-1, 1 min), and the combination of the two (flushed right after the 60-min intermission) were compared. The results showed that membrane relaxation and shear stress lonely was ineffective in improving the stable flux, while their combination enhanced the stable flux by 70%. A more open and spatially heterogeneous biofouling layer with a low extracellular polymeric substance (EPS) content and a high microbial activity was formed under the combination of membrane relaxation and shear stress. In-situ optical coherence tomography (OCT) observation revealed that, during intermission, the absence of pushing force by water flow induced a reversible expansion of biofouling layer, and the biofouling layer restored to its initial state soon after resuming filtration. Shear stress caused abrasion and erosion on the biofouling surface, but it exerted little effect on the interior of biofouling layer. Under the combination, however, both the surface and interior of biofouling layer were disturbed because of 1) the water vortexes caused by rough biofouling layer surface, and 2) the porous structure after 60-min intermission. This disturbance, in turn, helped the biofouling layer maintain its roughness and porosity, thereby improving the stable flux of GDM system.
Keywords: Biofouling layer; GDM system; Membrane relaxation; Shear stress; Stable flux.
Copyright © 2020 Elsevier Ltd. All rights reserved.