Load-displacement experimental data from axial tensile loading of CFRP-SPCC hybrid laminates

Muhammad Akhsin Muflikhun; Alvin Y Chua

doi:10.1016/j.dib.2020.105306

Load-displacement experimental data from axial tensile loading of CFRP-SPCC hybrid laminates

Data Brief. 2020 Feb 19:29:105306. doi: 10.1016/j.dib.2020.105306. eCollection 2020 Apr.

Authors

Muhammad Akhsin Muflikhun¹, Alvin Y Chua²

Affiliations

¹ Department of Mechanical and Industrial Engineering, Gadjah Mada University, Indonesia.
² Mechanical Engineering Department, De La Salle University, Philippines.

Abstract

The current paper shows a data set of load-displacement output from axial tensile loading of CFRP-SPCC hybrid laminates. The specimen geometries are cut based on standard procedure from ASTM D-3039. At least 3 positions in each specimen, we measured its width and thickness. Data of the load and displacement were repeated at least 3 samples in each combination of hybrid laminates. Tensile test was conducted with a 1 mm/min of loading rate. The data were recorded from unloading until failure of specimens. The data gives information about the highest load and the behavior of load-displacement in axial tensile loading. By using width and thickness, normalized data can be obtained, the load can be calculated into stress (MPa) unit. The data are useful for researchers and structural engineers that deals with CFRP, SPCC, and hybrid CFRP-SPCC laminates.

Keywords: CFRP; Hybrid laminate; Load-displacement; SPCC; Tensile loading.