The residual strain distribution has been measured as a function of depth in both top coat and bond coat in as-received and heat-treated air plasma sprayed thermal barrier coating samples. High-energy synchrotron X-ray beams were used in transmission to produce full Debye-Scherrer rings whose non-circular aspect ratio gave the in-plane and out-of-plane strains far more efficiently than the sin2ψ method. The residual strain in the bond coat is found to be tensile and the strain in the β phase of the as-received sample was measured. The residual strains observed in the top coat were generally compressive (increasing towards the interface), with two kinds of nonlinear trend. These was a 'jump' feature near the interface, and in some cases there was another 'jump' feature near the surface. It is shown how these trend differences can be correlated to cracks in the coating.
Keywords: 2D X-ray diffraction strain mapping; high-energy synchrotron; nondestructive testing; thermal barrier coatings; turbine blades.
© Li, Xiao and Cernik 2020.