Performance of WO3-Incorporated Carbon Electrodes for Ambient Mesoscopic Perovskite Solar Cells

Shubhranshu Bhandari; Anurag Roy; Aritra Ghosh; Tapas Kumar Mallick; Senthilarasu Sundaram

doi:10.1021/acsomega.9b02934

Performance of WO₃-Incorporated Carbon Electrodes for Ambient Mesoscopic Perovskite Solar Cells

ACS Omega. 2019 Dec 30;5(1):422-429. doi: 10.1021/acsomega.9b02934. eCollection 2020 Jan 14.

Authors

Shubhranshu Bhandari¹, Anurag Roy¹, Aritra Ghosh¹, Tapas Kumar Mallick¹, Senthilarasu Sundaram¹

Affiliation

¹ Environment and Sustainability Institute (ESI), Penryn Campus, University of Exeter, Cornwall TR10 9FE, U.K.

Abstract

The stability of perovskite solar cells (PSC) is often compromised by the organic hole transport materials (HTMs). We report here the effect of WO₃ as an inorganic HTM for carbon electrodes for improved stability in PSCs, which are made under ambient conditions. Sequential fabrication of the PSC was performed under ambient conditions with mesoporous TiO₂/Al₂O₃/CH₃NH₃PbI₃ layers, and, on the top of these layers, the WO₃ nanoparticle-embedded carbon electrode was used. Different concentrations of WO₃ nanoparticles as HTM incorporated in carbon counter electrodes were tested, which varied the stability of the cell under ambient conditions. The addition of 7.5% WO₃ (by volume) led to a maximum power conversion efficiency of 10.5%, whereas the stability of the cells under ambient condition was ∼350 h, maintaining ∼80% of the initial efficiency under light illumination. At the same time, the higher WO₃ concentration exhibited an efficiency of 9.5%, which was stable up to ∼500 h with a loss of only ∼15% of the initial efficiency under normal atmospheric conditions and light illumination. This work demonstrates an effective way to improve the stability of carbon-based perovskite solar cells without affecting the efficiency for future applications.