Conductive natural-based separators for application in polymer electrolyte fuel cells (PEFCs) were fabricated by combining a bacterial polysaccharide, i.e. bacterial cellulose (BC), and an algae sulphated polysaccharide, i.e. fucoidan (Fuc). The diffusion of fucoidan aqueous solution containing a natural-based cross-linker, viz. tannic acid, into the wet BC nanofibrous three-dimensional network, followed by thermal cross-linking, originated fully bio-based proton exchange membranes (PEMs). The PEMs present thermal-oxidative stability in the range of 180-200 °C and good dynamic mechanical performance (storage modulus ≥ 460 MPa). Additionally, the BC/Fuc membranes exhibit protonic conductivity that increases with increasing relative humidity (RH), which is a typical feature for numerous water-mediated proton conductors. The traditional Arrhenius-type plots demonstrate a linear behaviour with a maximum protonic conductivity of 1.6 mS cm-1 at 94 °C and 98 % RH. The results showed that these fully bio-based conductive membranes have potential as eco-friendly alternatives to other PEMs for application in PEFCs.
Keywords: Bacterial cellulose; Fucoidan; Fully bio-based separators; Proton-exchange membranes; Protonic conductivity.
Copyright © 2019 Elsevier Ltd. All rights reserved.