The aim of our research work was to develop dermally applicable, semisolid film-forming systems (FFSs) containing silicones, which form a film on the skin in situ, with suitable mechanical properties for skin application. FFSs were developed and investigated by means of the Quality by Design (QbD) methodology. With this QbD approach, the initial risk assessment defines the critical quality attributes (CQAs), the critical material attributes (CMAs) and the critical process parameters (CPPs) to ensure the required quality. Different semisolid systems were formed with or without silicones. During the initial risk assessment, three CQAs, namely skin adhesion, film flexibility and burst strength, were found to be critical attributes, while film appearance, film integrity and the drying time of the semisolid system, were found to be medium attributes. These parameters were investigated. The initial risk assessment also showed that there are three high CMAs: the type of silicones, film-forming excipients, drying excipients, and that there was one medium CMA: viscosity-enhancing excipients. Based on our results, the silicone content had a great effect on the film-forming systems. Different silicones affected the mechanical properties of the films in varying ways, decreased the drying time and showed promising results regarding the drying mechanism.
Keywords: film forming system; in situ dermal film; quality by design; silicones.