In the work, the poly(lactic acid) (PLA)/poly (ethylene-butylacrylate-glycidyl methacrylate) (PTW) blends were prepared by melt compounding. PTW as a toughening agent for PLA, the PLA/PTW blends had good compatibility due to the chemical reaction between the epoxy groups of PTW and the end group of PLA during the blending process. With increasing PTW content from 0 to 20%, the impact strength of PLA/PTW blends was enhanced from 4.6 to 54.1 kJ/m2 and the elongation at break was increased from 5.6% to 270%. The scanning electron microscopy (SEM) images of the impact fracture surfaces showed a large amount of cavities and plastic deformation, which caused by the elastomer and the interfacial adhesion enhanced through the interaction of the terminal functional groups. That was the reason that the toughness of PLA was increased. Finally, proteinase K-catalyzed degradation tests shown that the addition of PTW was beneficial to the biodegradation of PLA and reduced environmental pollution.
Keywords: Enzymatic degradation; Miscibility; Poly(ethylene-butylacrylate-glycidyl methacrylate); Poly(lactic acid); Toughening.
Copyright © 2019. Published by Elsevier B.V.