Data on the morphology and chemical state of coatings based on TiN obtained by condensation with ion bombardment on various substrates

Petr M Korusenko; Sergey N Nesov; Sergey N Povoroznyuk; Pavel V Orlov; Dmitry N Korotaev; Konstantin N Poleschenko; Evgeny E Tarasov

doi:10.1016/j.dib.2019.104737

Data on the morphology and chemical state of coatings based on TiN obtained by condensation with ion bombardment on various substrates

Data Brief. 2019 Nov 4:27:104737. doi: 10.1016/j.dib.2019.104737. eCollection 2019 Dec.

Authors

Petr M Korusenko¹, Sergey N Nesov¹, Sergey N Povoroznyuk¹, Pavel V Orlov², Dmitry N Korotaev², Konstantin N Poleschenko², Evgeny E Tarasov³

Affiliations

¹ Omsk State Technical University, Mira Avenue 11, 644050, Omsk, Russia.
² Siberian State Automobile and Highway University, Mira Avenue 5, 644080, Omsk, Russia.
³ Federal Research and Production Center "Progress", 5th Kordnaya Street 4, 644018, Omsk, Russia.

Abstract

This article presents the effect of the substrate on the morphology and chemical composition of titanium nitride coatings formed using the condensation with ion bombardment method. Various steels, sintered hard alloy (tungsten carbide - 92%, cobalt - 8%) and titanium-based alloy were used as substrates. The paper presents the XPS data obtained at various depths from the surface. The article also presents the data of the wear resistance of coatings for road milling cutters.

Keywords: CIB; Coating; Condensation with ion bombardment; SEM; Titanium nitride; X-ray photoelectron spectroscopy; XPS.