A systematic investigation of the influence of pseudowollastonite on the performance of a new family of low calcium hydraulic binders is described. Samples of the new low calcium binder were produced by an innovative process consisting of heating and homogenizing the mix of raw materials (limestone, sand, and fuel cracking catalyst) at a constant temperature followed by the rapid cooling of the mixture itself. Different maximum temperatures, close to the melting temperature of the mix, were tested, and materials with CaO/SiO2 (C/S) ratios of 0.9, 1.1, and 1.25 were produced into the form of the amorphous phase with small percentages of pseudowollastonite. Compressive strength results were determined at 7, 28, and 90 days of hydration, and the hydrated phases were analyzed using isothermal calorimetry, X-ray diffraction (XRD) analysis, thermogravimetry analysis (TGA), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The present work is focused on the influence of the percentage of the pseudowollastonite phase on the binder compressive strength performance.
Keywords: cement; decarbonation; hydraulic binders; pseudowollastonite.