Objectives: The present study examined the effects of Na+→K+ ion-exchange on the wear performance of feldspathic veneering porcelain.
Methods: Bar and disk specimens were prepared using IPS classic as the feldspathic veneering porcelain. After ion-exchange by immersion of the specimens in melted KNO3 at two temperatures for different time-periods, the bars were tested for flexural strength and Vickers surface hardness. The disks were paired with zirconia antagonists and tested with a pin-on-disk tribometer with 10 N for 70☓104 wear cycles in artificial saliva. Wear analysis of the porcelain and zirconia was performed using 3D profilometer and analysed with one-way analysis of variance and Tukey's post-hoc pairwise comparison procedures. Worn surfaces were examined with scanning electron microscopy.
Results: The feldspathic veneering porcelain exhibited strong time-dependent wear behaviour, with typical running-in and steady wear stages. Ion-exchange treatments at 380 °C and 440 °C both enhanced the mechanical properties, decreased the wear rates of running-in wear and steady wear. The wear performance of porcelain treated by ion-exchange at lower temperature (380 °C) was improved significantly, especially reducing the wear rate of the running-in stage.
Conclusion: A thicker ion-exchange layer with less stress relaxation may be obtained by ion-exchange at lower exchange temperature for a long processing time. Such a protocol improves the wear performance of the porcelain effectively.
Clinical significance: Restorations with veneering porcelain may fail prematurely due to excessive wear. It important to improve the wear performance of the porcelain. Ion-exchange has the potential to strengthen dental veneering porcelain. Understanding the effect of ion-exchange on the wear performance of porcelain provides insight improving the wear performance of these restorations.
Keywords: Feldspathic veneering porcelain; Ion-exchange; Wear performance.
Published by Elsevier Ltd.