The achievement of varied metal alloys through the sintering of mixtures of elemental metallic powders can provide great flexibility of production of these alloys. The possibilities of controlling the composition and the resulting properties of the alloy are of great importance for metallurgy. Otherwise the alloys involving chromium offer many difficulties for their attainment through the process of powder metallurgy (PM). In the formation of alloys with chromium (Cr), an oxide layer that prevents the ideal contact between the particles is formed. Hence the need for researches that study sintering processes and that can solve this difficulty. With this objective, this paper presents a method to determine parameters and describe the sintering process of mixtures of the elemental metallic powders Fe-Cr and Fe-Cr-Ni, assessing the elements' diffusing capacity and the possible alternative composition of an alloy. The method used Scanning Electron Microscopy (SEM) associated with Energy Dispersive Spectrometry (EDS), X-ray diffraction (XRD) and Vickers microindentation hardness analysis (HV). For the microstructural characterization, we used optical microscopy (OM) and SEM. And EDS mapping was applied for the analysis of the elements' dispersion. •The method makes it possible to define the ideal sintering time to obtain a good diffusion of the mixtures of the metallic powders Fe-Cr.•With the method, it is possible to verify the dispersion of the powders and whether the microstructure generated is similar to the ones of prealloyed powders.•With the applied procedures, the conditions for the formation of Fe-Cr alloys can be obtained by mixing dissociated and diffusion-bonded elemental metallic powders.
Keywords: Chromium; Diffusion of metallic powders; Elemental metallic powders mixture; Method for the determination of parameters in the sintering process of mixtures of the elemental powders Fe-Cr and Fe-Cr-Ni; Sintering; Stainless steel.