Purpose: To assess corneal biomechanical changes after conventional corneal crosslinking (CXL), with and without oxygen enrichment.
Methods: Sixty fresh porcine corneas were randomly divided into group 1 (control), group 2 (conventional CXL), and group 3 (conventional CXL in a high-oxygen environment during ultraviolet A [UVA] irradiation). After crosslinking, a 5-mm wide corneal strip was extracted using a double-bladed knife from 12 to 6'o clock. The Young's modulus of each strip was determined by stress-strain measurements. A comparison between the three groups was performed with a one-way analysis of variance.
Results: At 4% strain, the Young's modulus of the corneas in groups 1, 2, and 3 were: 0.68±0.20 megapascal (MPa), 1.01±0.23 MPa, and 1.12±0.24 MPa, respectively. The Young's modulus values for groups 2 and 3 showed no statistical significance (P>0.05), However, both groups 2 and 3 were significantly higher than group 1 (P<0.05). At 6% strain, the Young's modulus of the corneas in groups 1, 2, and 3 were: 0.97±0.21, 1.35±0.25, and 1.64±0.44 MPa, respectively, and at 8% strain, the Young's modulus was: 1.29±0.26, 1.72±0.45, 2.20±0.74 MPa, respectively. At 6% and 8% strain, the Young's modulus for the corneas in group 3 was significantly higher than those in both group 1 and group 2 (P<0.05).
Conclusions: Increasing oxygen concentration during UVA irradiation may improve the efficacy of conventional CXL.