This paper presents an analog interface application-specific integrated circuit (ASIC) for a capacitive angle encoder, which is widely used in control machine systems. The encoder consists of two parts: a sensitive structure and analog readout circuit. To realize miniaturization, low power consumption, and easy integration, an analog interface circuit including a DC capacitance elimination array and switch synchronous demodulation module was designed. The DC capacitance elimination array allows the measurement circuit to achieve a very high capacitance to voltage conversion ratio at a low supply voltage. Further, the switch synchronous demodulation module effectively removes the carrier signal and greatly reduces the sampling rate requirement of the analog-to-digital converter (ADC). The ASIC was designed and fabricated with standard 0.18 µm CMOS processing technology and integrated with the sensitive structure. An experiment was conducted to test and characterize the performance of the proposed analog interface circuit. The encoder measurement results showed a resolution of 0.01°, power consumption of 20 mW, and accuracy over the full absolute range of 0.1°, which indicates the great potential of the encoder for application in control machine systems.
Keywords: angle encoder; application-specific integrated circuit; capacitance elimination array; switch synchronous demodulation method.