We implement a logic switch by using a graphene acoustoelectric transducer at room temperature. We operate two pairs of inter-digital transducers (IDTs) to launch surface acoustic waves (SAWs) on a LiNbO3 substrate and utilize graphene as a channel material to sustain acoustoelectric current Iae induced by SAWs. By cooperatively tuning the input power on the IDTs, we can manipulate the propagation direction of Iae such that the measured Iae can be deliberately controlled to be positive, negative, or even zero. We define the zero-crossing Iae as [Formula: see text], and then demonstrate that Iae can be switched with a ratio [Formula: see text] at a rate up to few tens kHz. Our device with an accessible operation scheme provides a means to convert incoming acoustic waves modulated by digitized data sequence onto electric signals with frequency band suitable for digital audio modulation. Consequently, it could potentially open a route for developing graphene-based logic devices in large-scale integration electronics.