Study on the denitrification performance of FexLayOz/activated coke for NH3-SCR and the effect of CO escaped from activated coke at mid-high temperature on catalytic activity

Environ Sci Pollut Res Int. 2019 Jul;26(20):20248-20263. doi: 10.1007/s11356-019-05090-5. Epub 2019 May 16.

Abstract

Currently, activated coke is widely used in the removal of multiple pollutants from industrial flue gas. In this paper, a series of novel FexLayOz/AC catalysts was prepared by the incipient wetness impregnation for NH3-SCR denitrification reaction. The introduction of Fe-La bimetal oxides significantly improved the denitrification performance of activated coke at mid-high temperature, and 4% Fe0.3La0.7O1.5/AC exhibited a superior NOx conversion efficiency of 90.1% at 400 °C. The catalysts were further characterized by BET, SEM, XRD, Raman, EPR, XPS, FTIR, NH3-TPD, H2-TPR, et al., whose results showed that the perovskite-type oxide of LaFeO3 and oxygen vacancies were produced on the catalysts' surfaces during roasting. Fe-La doping enhanced the amount of acid sites (mainly Lewis and other stronger acid sites) and the content of multifarious oxygen species, which were beneficial for NOx removal at mid-high temperature. Moreover, it was investigated that the effect of released CO from activated coke at mid-high temperature on the NOx removal through the lifetime test, in which it was found that a large amount of CO produced by pyrolysis of activated coke could promote the NOx removal, and long-term escaping of CO on the activated coke carrier did not have a significant negative impact on catalytic performance. The results of the TG-IR test showed that volatile matter is released from the activated coke while TG results showed that the weight loss rate of 4% Fe0.3La0.7O1.5/AC only was 0.0015~0.007%/min at 300-400 °C. Hence, 4% Fe0.3La0.7O1.5/AC had excellent thermal stability and denitrification performance to be continuously used at mid-high temperature. Finally, the mechanisms were proposed on the basis of experiments and characterization results.

Keywords: FexLayOz/AC; Mechanism; NH3 and CO; NOx removal; Performance; SCR.

MeSH terms

  • Ammonium Compounds / analysis*
  • Calcium Compounds / analysis
  • Carbon Monoxide / analysis*
  • Catalysis
  • Charcoal / chemistry*
  • Denitrification
  • Nitrogen Oxides / analysis*
  • Oxidation-Reduction
  • Oxides / analysis
  • Oxides / chemistry*
  • Oxygen / analysis
  • Temperature
  • Titanium / analysis

Substances

  • Ammonium Compounds
  • Calcium Compounds
  • Nitrogen Oxides
  • Oxides
  • lanthanum iron oxide
  • perovskite
  • Charcoal
  • Carbon Monoxide
  • Titanium
  • Oxygen